100% Original Tango Key Programmer with Basic Software Tango Programmer Latest Free Update Online

Top 3 Reasons To Get Tango:

1. Original
2. Free Update Online
3. Latest Version: 1.107.7

Notice:
1. After buy it, you will need to connect to the official website and update within 28 days, or it will get locked
2. If you want to get authorization for special functions or cars, please refer to this website
3. After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
4. If your Tango already get G chip authorization, it can only generate G chip 10 times per day.

V1.106.0 Tango Software Newly Added (Free Online Update):

[+] Techtream calculator: v9.30, v10.10
[+] Key maker Cit-roen Jumper 2012-(95640,HITAG)*
[+] Key maker Isu-zu NPR 2007-(93C56,HITAG)
[+] Key maker Peu-geot 206 2001- (95160,HITAG)
[+] Key maker Peu-geot Partner 2002- (95160,HITAG)
[+] Image generator Chev-rolet Spark (ID8E)
[+] Cloning of Toyo-ta and Su-baru 80 bit Keys**
[+] Added transponders CN2, CN5 to the Clone mode

V1.103 Tango Software Added (Online Update)

Key maker Toyo-ta Yaris 2004 (93C56,4C)*
Key maker Ki-a Soul 2008- (TC1762,HITAG)
Key maker Isu-zu KB250 2004- (93C66,4D)
Key maker Mit-subishi Fuso Canter 2009- (93C66,4D)
Key maker Fia-t Du-cato 2012- (95640,HITAG)*
Key maker Fia-t Burstner Viseo 2011- (95640,HITAG)*
Key maker Kawa-saki Denso ECU 21175-0811 (93C86,ID4D)
Key maker Peug-eot Boxer 2012- (95640,HITAG)*
Key maker Peu-geot Manager 2013 (95160,HITAG)*
Key maker Re-nault Latitude 2010- (9S12, HITAG)*
Key maker Re-nault Safrane 2010- (9S12, HITAG)*
Key maker Re-nault Samsung SM5 2010- (9S12, HITAG)*
Key maker V-W New Betle (9S12, ID48EMU)
Dump maker BCM2 (95320,NEC)*
Image generator Great Wall ID40
Format Megamos48
Fixed bug EDC17 Dump editor

Tango Software V1.96.11, Tango Software Added:

Key maker Chev-rolet Cruze 2008- (24C16,HITAG)
Key maker Chev-rolet Lacetti 2005- (ST7,ID4D)
Key maker Re-nault Mascott 2002- (93C66,HITAG)
Key maker Re-nault Clio II 2003- (93C66,HITAG)
Key maker Hyun-dai Accent 2004- (93C56,ID4D)
Key maker Hyun-dai H1 2001- (93C56,ID4D)
Key maker Hyun-dai H200 2001- (93C56,ID4D)
Key maker Hyun-dai Santa Fe 2006- (93C56,ID4D)
Key maker Hyun-dai Sonata 2003- (93C56,ID4D)
Key maker Hyun-dai Starex 2002- (93C56,ID4D)
Key maker Hyun-dai Terracan 2001- (93C56,ID4D)
Key maker Hyun-dai Trajet 2004- (93C56,ID4D)
Key maker Ki-a Carnival 2002- (93C56,ID4D)
Key maker Ki-a Sorento 2003- (93C56,ID4D)
Key maker Vol-vo V40 2004- (9S12,ID48)
Key maker Vo-lvo V50 2004- (9S12,ID48)
New pictures in help file (total 315MB)
 
Tango Software V1.79:
 
Key maker Hon-da Stream -2006 (93C46,ID48)
Key maker Hon-da Fit 2007- (93C66,HITAG)
Key maker Hon-da bike ECU 38770-KTW-901 (93C66,HITAG)*
Key maker Hon-da bike ECU 38770-MCZ-003 (93C56,HITAG)*
Key maker Hon-da bike ECU 38770-MFN-D01 (93C56,HITAG)*
Key maker Hon-da bike ECU 38770-MEE-702 (93C56,HITAG)*
Key maker UAZ Hunter (TC1762,HITAG)
Key maker Suzu-ki SX4 2012- (TC1762,HITAG)
Key maker Maz-da B3000 2001- (95040,ID4D)
Key maker For-d Focus 2000 (77012,ID4D)
Key maker For-d Ka 2007 (93C86,ID4C)
Key maker Chry-sler Voyager Limited 2008- (93C86,HITAG)
Calculator Techstream 96 digits*
New pictures in help file (total 304MB)

List of Supported Transponders:

Philips Transponders: 
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
Auto switching between PCF7936-PCF7961 windows if invalid type detected.
Autodetect manchester / biphase

Temic Transponders:
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5

Megamos Transponders:
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey

Texas Transponders:
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (8C) reading

Atmel:
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.

Key Maker Usage.
Key maker usage consists of a four steps. The 4-th step is additional and depends on a vehicle model.
1. Open an immobilizer dump file.
2. Choose number of the key you want create.
3. Place a transponder into the coil and click the WRITE button.
4. In some cases the program asks you to save a modified immobilizer dump. This dump must to be written into the immobilizer.


First of all, take a look at this picture.  The "Loaded File" window displays the immobilizer file name. Ensure that a valid dump is stored. The "Maker" window displays selected maker name. Ensure the right key maker selected.

The "info" windows display an important information:
1. Original transponder---Informs you about type of the original transponder
2. Allowed transponder---Informs you what type of transponders is suitable for the key maker
3. Data location---The immobilizer memory may be stored in various chips, the description informs you about from where you have to read a dump. Some immobilizers can have various chipsets. In this case the field displays several possible chips. Find one of them inside of the immobilizer and read it.
4. Data size---Each chip has certain memory size, the key maker accepts files with the described size.
5. Data format---This field appears in case of 93CXX eeprom seria.

There are two standards of data layout:
Intel format and Motorola format or Little Endian and Big Endian respectively.
The data layout depends on a chip-programmer that is used for eeprom reading.This field informs you what kind of format is suitable for the key maker.Usually you can see that both formats are suitable. It means that the program can understand any data layout.

Create a Key Step by Step
Firstly, run the key maker interface according to the vehicle and read information in the "Info" window. Watch theData location field describes the memory chip. Find out the chip inside of the immobilizer and read it. Save the read data (dump).
Click the "OPEN IMMOBILIZER FILE" button and load the saved dump.
The program will analyse the dump.
If the dump is correct the "WRITE" button will become active and the "Keys" window will display the range of key numbers that can be created.
Take a look at the "Info" window, the Allowed transponder field.
Ensure you use a transponder exactly the indicated type.
Place the transponder into the coil.
Choose the key position you want create in the "Keys" window.
Click the "WRITE" button.
This starts the writing process and transponder will be stored with the appropriate data.
At this point you may be asked to save a new immobilizer dump.
The program displays a standard File Save dialog where you have to save the data.
After this you will be informed about the new data saved and must be written into the immobiliser.



Write the new dump into the immobilizer. Now it is ready to operate with the created transponder.If you are not asked to save a new file, it means that immobilizer is ready to operate with the created transponder without file replacing.

Finish

1. ABS plastic enclosure: ingress protection  IP65/DIN EN 60529
2. Rubber seal: prevents sliding on a workbench shock-proof function
3. USB connection:  no external power
4. Big hole:  adopted to large keys
5. Three small holes:  adopted to various sizes of transponders

FAQ:
 
Q: Hardware not found after install the software and driver, how to solve it?
A: You need to install the software v1.83 first, then v1.84, next v1.85(install the software from older to newer)
 
Q: Tango key programmer support update for free or not?
A: Update free You need to connect the official website to update once within 28 days, otherwise the machine will be blocked. If you need special function or work it on special car model, you need to pay for it, you can check specific cost online
 
Q: I reprogram a BMW key, if I can delete the reprogrammed key with Tango?
A: No, it do not support this function
 
Q: Is there tokens limitation for Tango? Is there any extra cost, such as update cost?
A: There is no tokens limitation for Tango. Software update online for free. But if you need special function, or want to work it on special car model, you need to pay money to open the authorization
 
Q: Do you have Tango user manual?
A: You can check Tango user manual in the menu after software installation